Welcome to GainStrong Industry Co.,Ltd.


  • banner
  • banner
  • banner
  • banner
  • banner

Product Name GS-PQI20

Product Specification:

  • chipset:QCA9886
  • Supports:20/40/80 MHz at 5 GHz
  • PCIE Slot:1
  • GPIOs:11
  • Power Supply:5V
  • Size:30.0 mm* 51.0 mm
Inquiry Now
  1. Product Description
    The PQI20 with QCA9886 is a highly integrated wireless local area network ( WLAN ) system for 5GHz 802.11ac WLAN applications. The QCA9886 implements half-duplex OFDM, CCK, and DSSS PHY, supporting 867Mbps for 802.11ac 80MHz channel operation in 5GHz mode and IEEE 802.11a/n/ac data rates. The QCA9886 supports 802.11 wireless MAC protocol, 802.11i security, Wi-Fi offload, error recovery, and 802.11equality of service (QoS).
    The QCA9886 supports up to two simultaneous spatial streams integrating two Tx and two Rx chains forhigh throughput and extended coverage. Tx chains combine PHY in-phase (I) and quadrature (Q) signals,convert them to the desired frequency, and drive the RF signal through external power amplifiers (PAs). Rxchains receive from antennas through external LNAs. The frequency synthesizer supports 1-MHz steps to match frequencies defined by IEEE 802.11a/n/ac specifications. The QCA9886
    supports frame data transfer to and from the host using a PCIE interface that supports interrupt generation and reporting and status reporting A major feature of this module is its high power, you can connect extra 5V for the module, then more stable signals and wider coverage are obtained. Another feature supports the MMCX connector. This will make your use experience even better.
  2. Product Features
    QCA9886 2*2 MIMO 5GHz WiFi 802.11 a/n/ac
    32K EEPROM
    Integrated CPU for Wi-Fi offload with memory and On-chip OTP memory.
    Support for up to two spatial streams
    Supports 20/40/80 MHz at 5 GHz
    Data rates of up to 867 Mbps in 802.11ac 80 MHz channels using
    reduced (short) guard interval (GI)
    Multi-user MIMO (MU-MIMO) beam former
    802.11ac explicit transmit beam forming (TxBF) and legacy implicit
    TxBF for both beam former and beamformee
    Supports spatial multiplexing, cyclic-delay diversity (CDD), low-
    density parity check (LDPC), maximal ratio combining (MRC), Space
    Time Block Code (STBC)
    Support for locationing (RSSI and RTT-based, 802.11REVmc
    AES-CCMP at 128/256 bits; AES-GCMP at 128/256 bits; WEP, TKIP
    hardware encryption; WAPI hardware encryption
    1*PCI Express 1.1 interface(Used by QCA9886)
    Extra 5V for the module
    supports the MMCX connector
    Size:30.0 mm* 51.0 mm.

May you like

write us

Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.


52 queries in 0.673 seconds